How to Choose the Right PV Combiner Box for Your Solar Installation
There's no single "best" combiner box — only the right one for your specific project. This guide walks you through every decision point, step by step, so you can specify with confidence.

Start With Your Project, Not the Product
The most common mistake when sourcing a combiner box is starting with the catalogue. A supplier shows you an 8-input, 1000 V box and it looks fine on paper. But without knowing your string count, your system voltage, your installation environment, and your local certification requirements — you can't know if it's actually right for your project.
Walk through these six steps before you request a quote.
Step-by-Step Selection Guide
Count Your Strings
How many solar panel strings will connect to this combiner box? Each string needs its own input and its own fuse or breaker. Common configurations are 4, 8, 12, or 16 inputs. Always round up: a 10-string array needs a 12-input box. Also leave headroom for future expansion if your site allows it.
Add 10–20% buffer above your current string countConfirm Your System Voltage
PV combiner boxes are rated for specific maximum DC voltages — typically 600 V, 1000 V, or 1500 V. Your system voltage depends on how many panels are wired in series per string and the panel's open-circuit voltage (Voc). The combiner box must be rated for at least the maximum open-circuit voltage of your strings — not the operating voltage.
Maximum System Voltage = Voc × Temperature Correction FactorCalculate Your Current Rating
The output busbar and main isolator must handle the total combined DC current from all strings. Total output current should be based on the sum of all string currents. String fuse ratings should comply with the module manufacturer's recommendations and applicable standards. If your numbers are at the edge of a rating tier, always go to the next tier up.
Total output current = Isc per string × number of stringsChoose the Right IP Rating for Your Environment
IP65 is the standard protection level for most outdoor photovoltaic installations and is suitable for the majority of commercial and utility-scale projects. For installations exposed to exceptionally harsh conditions—such as heavy dust, coastal salt spray, or frequent high-pressure water cleaning—higher enclosure protection may be considered according to project requirements.
In desert or coastal environments, pay particular attention to enclosure sealing, UV resistance, corrosion resistance, and maintenance requirements.Decide on Monitoring Requirements
Do you need to monitor individual string performance remotely? For projects with an operations team or a monitoring platform, a smart combiner box with per-string current sensors and RS485/Modbus output is well worth the cost. It pays for itself quickly by catching underperforming strings early — before they drag down the whole system unnoticed for months.
Any commercial project with a service contract should specify monitoring as standardCheck Certification Requirements
Certification requirements vary by project and local regulations. Depending on the application, buyers may request compliance with IEC standards, CE marking, TÜV certification, or other applicable third-party approvals. Always confirm the required certifications with your EPC contractor, local authority, or project owner before finalising your specification.
Request the full test report, not just a certificate numberEnvironment Quick Reference
Northern & Central Europe
IP65 enclosure is suitable for most installations. Ensure components are rated for low ambient temperatures.
Southern Europe (Mediterranean)
IP65 enclosure with UV-resistant materials is suitable for most installations. Additional protection may be required for highly corrosive environments.
Gulf & Arabian Peninsula
IP65 enclosure with effective sealing is commonly used. Consider enhanced enclosure materials and protection features for extreme desert conditions.
Turkey, North Africa & Levant
IP65 enclosure is generally suitable. Select enclosure materials according to local dust, UV exposure, and humidity conditions.
Specification Checklist
Before You Send a Request for Quotation
- Number of string inputs required (with expansion buffer)
- Maximum system DC voltage (temperature-corrected Voc)
- Total output current rating (sum of all string Isc values)
- Per-string fuse rating (according to module specifications and applicable standards)
- IP rating required for installation environment
- Enclosure material (steel / GRP / stainless)
- Ambient temperature operating range
- SPD requirement (Type I, II, or both)
- Monitoring required? (per-string current sensors, RS485/Modbus)
- Required standards and certifications (IEC, CE, TÜV or project-specific requirements)
- Installation method (wall mount, pole mount, floor-standing)

Want Help Reviewing Your Specification?
Send AITELEC your project details — panel model, string count, location — and our technical team will recommend the right combiner box configuration and provide a formal quotation.

